Temperature Resistant and Waterproof
Worktops made of high pressure laminates (HPL) can be used everywhere. They are temperature resistant (up to around 180°C), completely waterproof, and have high load capacity. They are easy to clean and can therefore be used in areas with high cleanliness requirements.
Type: 16 mm Trespa Toplab®BASE, Trespa Toplab®PLUS
Surface | Solid Trespa Toplab®BASE, Trespa Toplab®PLUS panel |
Thickness | 16 mm |
Edge finish | Rounded edge, radius 17 mm |
Colour | Baltic Blue |
Maximum length of a single worktop | 2.4 m |
Recommended basin materials | Polypropylene, epoxy resin, stainless steel |
Type: 16 mm Trespa Toplab®BASE, Trespa Toplab®PLUS
Surface | Solid Trespa Toplab®BASE, Trespa Toplab®PLUS panel |
Thickness | 16 mm |
Edge finish | Top edge bevelled 1.5 x 45° |
Colour | Baltic Blue |
Maximum length of a single worktop | 2.4 m |
Recommended basin materials | Polypropylene, epoxy resin, stainless steel |
Type: 37 mm Trespa Toplab®PLUS
Surface | Solid Trespa Toplab®PLUS panel |
Substrate | Trespa Toplab®PLUS, thickness 16 mm Interlining: PVC profile, height 13 mm |
Thickness | 37 mm (with marine edge) |
Edge finish | Epoxy marine edge |
Colour | Baltic Blue |
Maximum length of a single worktop | 2.4 m |
Recommended basin materials | Polypropylene |
Properties
Chemical resistance | Trespa Toplab®BASE: low Trespa Toplab®PLUS: good |
Temperature resistance | Good (up to around 180 °C) |
Scratch resistance | Good |
Shock resistance | Good |
Mechanical strength | Good |
Cutting to size on site | Possible |